torch time sequence, remaining episode: Consideration
That is the ultimate publish in a four-part introduction to time-series forecasting with torch. These posts have been the story of a quest for multiple-step prediction, and by now, we’ve seen three completely different approaches: forecasting in a loop, incorporating a multi-layer perceptron (MLP), and sequence-to-sequence fashions. Right here’s a fast recap.
-
As one ought to when one units out for an adventurous journey, we began with an in-depth study of the instruments at our disposal: recurrent neural networks (RNNs). We educated a mannequin to foretell the very subsequent statement in line, after which, considered a intelligent hack: How about we use this for multi-step prediction, feeding again particular person predictions in a loop? The consequence , it turned out, was fairly acceptable.
-
Then, the journey actually began. We constructed our first mannequin “natively” for multi-step prediction, relieving the RNN a little bit of its workload and involving a second participant, a tiny-ish MLP. Now, it was the MLP’s job to mission RNN output to a number of time factors sooner or later. Though outcomes had been fairly passable, we didn’t cease there.
-
As a substitute, we utilized to numerical time sequence a method generally utilized in pure language processing (NLP): sequence-to-sequence (seq2seq) prediction. Whereas forecast efficiency was not a lot completely different from the earlier case, we discovered the approach to be extra intuitively interesting, because it displays the causal relationship between successive forecasts.
As we speak we’ll enrich the seq2seq method by including a brand new part: the consideration module. Initially launched round 2014, consideration mechanisms have gained huge traction, a lot so {that a} current paper title begins out “Consideration is Not All You Want”.
The thought is the next.
Within the basic encoder-decoder setup, the decoder will get “primed” with an encoder abstract only a single time: the time it begins its forecasting loop. From then on, it’s by itself. With consideration, nonetheless, it will get to see the whole sequence of encoder outputs once more each time it forecasts a brand new worth. What’s extra, each time, it will get to zoom in on these outputs that appear related for the present prediction step.
It is a notably helpful technique in translation: In producing the following phrase, a mannequin might want to know what a part of the supply sentence to give attention to. How a lot the approach helps with numerical sequences, in distinction, will doubtless rely upon the options of the sequence in query.
As earlier than, we work with vic_elec, however this time, we partly deviate from the best way we used to make use of it. With the unique, bi-hourly dataset, coaching the present mannequin takes a very long time, longer than readers will wish to wait when experimenting. So as an alternative, we mixture observations by day. As a way to have sufficient knowledge, we prepare on years 2012 and 2013, reserving 2014 for validation in addition to post-training inspection.
We’ll try and forecast demand as much as fourteen days forward. How lengthy, then, needs to be the enter sequences? It is a matter of experimentation; all of the extra so now that we’re including within the consideration mechanism. (I believe that it won’t deal with very lengthy sequences so nicely).
Under, we go together with fourteen days for enter size, too, however that will not essentially be the absolute best selection for this sequence.
n_timesteps <- 7 * 2
n_forecast <- 7 * 2
elec_dataset <- dataset(
title = "elec_dataset",
initialize = perform(x, n_timesteps, sample_frac = 1) {
self$n_timesteps <- n_timesteps
self$x <- torch_tensor((x - train_mean) / train_sd)
n <- length(self$x) - self$n_timesteps - 1
self$begins <- sort(sample.int(
n = n,
dimension = n * sample_frac
))
},
.getitem = perform(i) {
begin <- self$begins[i]
finish <- begin + self$n_timesteps - 1
lag <- 1
list(
x = self$x[start:end],
y = self$x[(start+lag):(end+lag)]$squeeze(2)
)
},
.size = perform() {
length(self$begins)
}
)
batch_size <- 32
train_ds <- elec_dataset(elec_train, n_timesteps)
train_dl <- train_ds %>% dataloader(batch_size = batch_size, shuffle = TRUE)
valid_ds <- elec_dataset(elec_valid, n_timesteps)
valid_dl <- valid_ds %>% dataloader(batch_size = batch_size)
test_ds <- elec_dataset(elec_test, n_timesteps)
test_dl <- test_ds %>% dataloader(batch_size = 1)Mannequin-wise, we once more encounter the three modules acquainted from the earlier publish: encoder, decoder, and top-level seq2seq module. Nevertheless, there may be an extra part: the consideration module, utilized by the decoder to acquire consideration weights.
Encoder
The encoder nonetheless works the identical method. It wraps an RNN, and returns the ultimate state.
encoder_module <- nn_module(
initialize = perform(sort, input_size, hidden_size, num_layers = 1, dropout = 0) {
self$sort <- sort
self$rnn <- if (self$sort == "gru") {
nn_gru(
input_size = input_size,
hidden_size = hidden_size,
num_layers = num_layers,
dropout = dropout,
batch_first = TRUE
)
} else {
nn_lstm(
input_size = input_size,
hidden_size = hidden_size,
num_layers = num_layers,
dropout = dropout,
batch_first = TRUE
)
}
},
ahead = perform(x) {
# return outputs for all timesteps, in addition to last-timestep states for all layers
x %>% self$rnn()
}
)Consideration module
In primary seq2seq, at any time when it needed to generate a brand new worth, the decoder took under consideration two issues: its prior state, and the earlier output generated. In an attention-enriched setup, the decoder moreover receives the whole output from the encoder. In deciding what subset of that output ought to matter, it will get assist from a brand new agent, the eye module.
This, then, is the eye module’s raison d’être: Given present decoder state and nicely as full encoder outputs, acquire a weighting of these outputs indicative of how related they’re to what the decoder is at the moment as much as. This process ends in the so-called consideration weights: a normalized rating, for every time step within the encoding, that quantify their respective significance.
Consideration could also be applied in numerous alternative ways. Right here, we present two implementation choices, one additive, and one multiplicative.
Additive consideration
In additive consideration, encoder outputs and decoder state are generally both added or concatenated (we select to do the latter, under). The ensuing tensor is run by a linear layer, and a softmax is utilized for normalization.
attention_module_additive <- nn_module(
initialize = perform(hidden_dim, attention_size) {
self$consideration <- nn_linear(2 * hidden_dim, attention_size)
},
ahead = perform(state, encoder_outputs) {
# perform argument shapes
# encoder_outputs: (bs, timesteps, hidden_dim)
# state: (1, bs, hidden_dim)
# multiplex state to permit for concatenation (dimensions 1 and a pair of should agree)
seq_len <- dim(encoder_outputs)[2]
# ensuing form: (bs, timesteps, hidden_dim)
state_rep <- state$permute(c(2, 1, 3))$repeat_interleave(seq_len, 2)
# concatenate alongside function dimension
concat <- torch_cat(list(state_rep, encoder_outputs), dim = 3)
# run by linear layer with tanh
# ensuing form: (bs, timesteps, attention_size)
scores <- self$consideration(concat) %>%
torch_tanh()
# sum over consideration dimension and normalize
# ensuing form: (bs, timesteps)
attention_weights <- scores %>%
torch_sum(dim = 3) %>%
nnf_softmax(dim = 2)
# a normalized rating for each supply token
attention_weights
}
)Multiplicative consideration
In multiplicative consideration, scores are obtained by computing dot merchandise between decoder state and the entire encoder outputs. Right here too, a softmax is then used for normalization.
attention_module_multiplicative <- nn_module(
initialize = perform() {
NULL
},
ahead = perform(state, encoder_outputs) {
# perform argument shapes
# encoder_outputs: (bs, timesteps, hidden_dim)
# state: (1, bs, hidden_dim)
# permit for matrix multiplication with encoder_outputs
state <- state$permute(c(2, 3, 1))
# put together for scaling by variety of options
d <- torch_tensor(dim(encoder_outputs)[3], dtype = torch_float())
# scaled dot merchandise between state and outputs
# ensuing form: (bs, timesteps, 1)
scores <- torch_bmm(encoder_outputs, state) %>%
torch_div(torch_sqrt(d))
# normalize
# ensuing form: (bs, timesteps)
attention_weights <- scores$squeeze(3) %>%
nnf_softmax(dim = 2)
# a normalized rating for each supply token
attention_weights
}
)Decoder
As soon as consideration weights have been computed, their precise utility is dealt with by the decoder. Concretely, the tactic in query, weighted_encoder_outputs(), computes a product of weights and encoder outputs, ensuring that every output could have acceptable affect.
The remainder of the motion then occurs in ahead(). A concatenation of weighted encoder outputs (typically known as “context”) and present enter is run by an RNN. Then, an ensemble of RNN output, context, and enter is handed to an MLP. Lastly, each RNN state and present prediction are returned.
decoder_module <- nn_module(
initialize = perform(sort, input_size, hidden_size, attention_type, attention_size = 8, num_layers = 1) {
self$sort <- sort
self$rnn <- if (self$sort == "gru") {
nn_gru(
input_size = input_size,
hidden_size = hidden_size,
num_layers = num_layers,
batch_first = TRUE
)
} else {
nn_lstm(
input_size = input_size,
hidden_size = hidden_size,
num_layers = num_layers,
batch_first = TRUE
)
}
self$linear <- nn_linear(2 * hidden_size + 1, 1)
self$consideration <- if (attention_type == "multiplicative") attention_module_multiplicative()
else attention_module_additive(hidden_size, attention_size)
},
weighted_encoder_outputs = perform(state, encoder_outputs) {
# encoder_outputs is (bs, timesteps, hidden_dim)
# state is (1, bs, hidden_dim)
# ensuing form: (bs * timesteps)
attention_weights <- self$consideration(state, encoder_outputs)
# ensuing form: (bs, 1, seq_len)
attention_weights <- attention_weights$unsqueeze(2)
# ensuing form: (bs, 1, hidden_size)
weighted_encoder_outputs <- torch_bmm(attention_weights, encoder_outputs)
weighted_encoder_outputs
},
ahead = perform(x, state, encoder_outputs) {
# encoder_outputs is (bs, timesteps, hidden_dim)
# state is (1, bs, hidden_dim)
# ensuing form: (bs, 1, hidden_size)
context <- self$weighted_encoder_outputs(state, encoder_outputs)
# concatenate enter and context
# NOTE: this repeating is finished to compensate for the absence of an embedding module
# that, in NLP, would give x a better proportion within the concatenation
x_rep <- x$repeat_interleave(dim(context)[3], 3)
rnn_input <- torch_cat(list(x_rep, context), dim = 3)
# ensuing shapes: (bs, 1, hidden_size) and (1, bs, hidden_size)
rnn_out <- self$rnn(rnn_input, state)
rnn_output <- rnn_out[[1]]
next_hidden <- rnn_out[[2]]
mlp_input <- torch_cat(list(rnn_output$squeeze(2), context$squeeze(2), x$squeeze(2)), dim = 2)
output <- self$linear(mlp_input)
# shapes: (bs, 1) and (1, bs, hidden_size)
list(output, next_hidden)
}
)seq2seq module
The seq2seq module is mainly unchanged (other than the truth that now, it permits for consideration module configuration). For an in depth clarification of what occurs right here, please seek the advice of the previous post.
seq2seq_module <- nn_module(
initialize = perform(sort, input_size, hidden_size, attention_type, attention_size, n_forecast,
num_layers = 1, encoder_dropout = 0) {
self$encoder <- encoder_module(sort = sort, input_size = input_size, hidden_size = hidden_size,
num_layers, encoder_dropout)
self$decoder <- decoder_module(sort = sort, input_size = 2 * hidden_size, hidden_size = hidden_size,
attention_type = attention_type, attention_size = attention_size, num_layers)
self$n_forecast <- n_forecast
},
ahead = perform(x, y, teacher_forcing_ratio) {
outputs <- torch_zeros(dim(x)[1], self$n_forecast)
encoded <- self$encoder(x)
encoder_outputs <- encoded[[1]]
hidden <- encoded[[2]]
# checklist of (batch_size, 1), (1, batch_size, hidden_size)
out <- self$decoder(x[ , n_timesteps, , drop = FALSE], hidden, encoder_outputs)
# (batch_size, 1)
pred <- out[[1]]
# (1, batch_size, hidden_size)
state <- out[[2]]
outputs[ , 1] <- pred$squeeze(2)
for (t in 2:self$n_forecast) {
teacher_forcing <- runif(1) < teacher_forcing_ratio
enter <- if (teacher_forcing == TRUE) y[ , t - 1, drop = FALSE] else pred
enter <- enter$unsqueeze(3)
out <- self$decoder(enter, state, encoder_outputs)
pred <- out[[1]]
state <- out[[2]]
outputs[ , t] <- pred$squeeze(2)
}
outputs
}
)When instantiating the top-level mannequin, we now have an extra selection: that between additive and multiplicative consideration. Within the “accuracy” sense of efficiency, my exams didn’t present any variations. Nevertheless, the multiplicative variant is quite a bit sooner.
web <- seq2seq_module("gru", input_size = 1, hidden_size = 32, attention_type = "multiplicative",
attention_size = 8, n_forecast = n_forecast)Identical to final time, in mannequin coaching, we get to decide on the diploma of trainer forcing. Under, we go together with a fraction of 0.0, that’s, no forcing in any respect.
optimizer <- optim_adam(web$parameters, lr = 0.001)
num_epochs <- 1000
train_batch <- perform(b, teacher_forcing_ratio) {
optimizer$zero_grad()
output <- web(b$x, b$y, teacher_forcing_ratio)
goal <- b$y
loss <- nnf_mse_loss(output, goal[ , 1:(dim(output)[2])])
loss$backward()
optimizer$step()
loss$merchandise()
}
valid_batch <- perform(b, teacher_forcing_ratio = 0) {
output <- web(b$x, b$y, teacher_forcing_ratio)
goal <- b$y
loss <- nnf_mse_loss(output, goal[ , 1:(dim(output)[2])])
loss$merchandise()
}
for (epoch in 1:num_epochs) {
web$prepare()
train_loss <- c()
coro::loop(for (b in train_dl) {
loss <-train_batch(b, teacher_forcing_ratio = 0.0)
train_loss <- c(train_loss, loss)
})
cat(sprintf("nEpoch %d, coaching: loss: %3.5f n", epoch, mean(train_loss)))
web$eval()
valid_loss <- c()
coro::loop(for (b in valid_dl) {
loss <- valid_batch(b)
valid_loss <- c(valid_loss, loss)
})
cat(sprintf("nEpoch %d, validation: loss: %3.5f n", epoch, mean(valid_loss)))
}# Epoch 1, coaching: loss: 0.83752
# Epoch 1, validation: loss: 0.83167
# Epoch 2, coaching: loss: 0.72803
# Epoch 2, validation: loss: 0.80804
# ...
# ...
# Epoch 99, coaching: loss: 0.10385
# Epoch 99, validation: loss: 0.21259
# Epoch 100, coaching: loss: 0.10396
# Epoch 100, validation: loss: 0.20975 For visible inspection, we decide a number of forecasts from the take a look at set.
web$eval()
test_preds <- vector(mode = "checklist", size = length(test_dl))
i <- 1
vic_elec_test <- vic_elec_daily %>%
filter(year(Date) == 2014, month(Date) %in% 1:4)
coro::loop(for (b in test_dl) {
output <- web(b$x, b$y, teacher_forcing_ratio = 0)
preds <- as.numeric(output)
test_preds[[i]] <- preds
i <<- i + 1
})
test_pred1 <- test_preds[[1]]
test_pred1 <- c(rep(NA, n_timesteps), test_pred1, rep(NA, nrow(vic_elec_test) - n_timesteps - n_forecast))
test_pred2 <- test_preds[[21]]
test_pred2 <- c(rep(NA, n_timesteps + 20), test_pred2, rep(NA, nrow(vic_elec_test) - 20 - n_timesteps - n_forecast))
test_pred3 <- test_preds[[41]]
test_pred3 <- c(rep(NA, n_timesteps + 40), test_pred3, rep(NA, nrow(vic_elec_test) - 40 - n_timesteps - n_forecast))
test_pred4 <- test_preds[[61]]
test_pred4 <- c(rep(NA, n_timesteps + 60), test_pred4, rep(NA, nrow(vic_elec_test) - 60 - n_timesteps - n_forecast))
test_pred5 <- test_preds[[81]]
test_pred5 <- c(rep(NA, n_timesteps + 80), test_pred5, rep(NA, nrow(vic_elec_test) - 80 - n_timesteps - n_forecast))
preds_ts <- vic_elec_test %>%
choose(Demand, Date) %>%
add_column(
ex_1 = test_pred1 * train_sd + train_mean,
ex_2 = test_pred2 * train_sd + train_mean,
ex_3 = test_pred3 * train_sd + train_mean,
ex_4 = test_pred4 * train_sd + train_mean,
ex_5 = test_pred5 * train_sd + train_mean) %>%
pivot_longer(-Date) %>%
update_tsibble(key = title)
preds_ts %>%
autoplot() +
scale_color_hue(h = c(80, 300), l = 70) +
theme_minimal()
Determine 1: A pattern of two-weeks-ahead predictions for the take a look at set, 2014.
We are able to’t straight evaluate efficiency right here to that of earlier fashions in our sequence, as we’ve pragmatically redefined the duty. The primary objective, nonetheless, has been to introduce the idea of consideration. Particularly, manually implement the approach – one thing that, when you’ve understood the idea, it’s possible you’ll by no means must do in follow. As a substitute, you’ll doubtless make use of current instruments that include torch (multi-head consideration and transformer modules), instruments we could introduce in a future “season” of this sequence.
Thanks for studying!
Picture by David Clode on Unsplash
